CortecLogo3dlt.gif iso.gif
VpCI® HIGH PERFORMANCE COATINGS
 

Click on the links below to access product descriptions and other information regarding various VpCI® (Vapor Phase Corrosion Inhibitor)/MCI® (Migrating Corrosion Inhibitor) product lines.


NASA: Cortec Rust Inhibitor Coating is Used Extensively During Post Flight Operations; United Space Alliance, 3830-058

Wyland Foundation Letter of Thanks

Painter used VpCI® - 386 Clear Coat on his work.

Method Developed to Protect "Insurance Spares"

CorrBarrier
Description:
CorrBarrier is a waterbased coating which exhibits excellent properties over various substrates. Primarily designed for the automotive under-body/under-hood market, it also has application in industrial maintenance, railcar, truck/trailer, and heavy machinery.

Designed as a clear primer, CorrBarrier has excellent chip resistance while maintaining a fast dry time.

This coating is heavy metal free, has good early water resistance, excellent salt fog resistance and very low VOC content.

Application:
CorrBarrier may be applied by brush, spray, or dip. A film thickness of at least 4-5 wet mils (100-125 microns) is recommended for uncovered outdoor storage.
View Product Data Sheet
View Safety Data Sheet


CorrVerter® Rust Primer
Description:
CorrVerter is a water-based primer recommended for application to rusty or poorly prepared steel surfaces where further corrosion protection is required and good surface preparation is difficult to achieve. CorrVerter is formulated to penetrate rust, eliminate rust, penetrate to the bare metal, and stop further rusting.

CorrVerter contains a novel chemical chelating agent that modifies the surface rust into a hydrophobic passive layer. CorrVerter combines the above mentioned chelating agent with a high solids waterborne latex with extremely low water vapor permeability. The combination of the active chelating agent with a film-forming latex, thickeners and dispersant offers a unique formulation for a primer with excellent protection against re-rusting.

CorrVerter does not contain tannic or phosphoric acids, provides long-term corrosion protection for poorly prepared substrates, and can be topcoated with solvent-based and water-based paints with no bleeding. For outdoor applications VpCI-386 or VpCI-387 can be utilized. For indoor applications, VpCI-396 may also be used.

The combination of CorrVerter and VpCI-396 provides the best immersion coating for submersion in water, salt water, hydro carbons and high salinity water.
Application: Outdoor storage, aircraft, elevators, storage tanks, vehicles, pumps, cargo holds, marine equipment.
Package:
CorrVerter is available in 5 gallon (19 liter) plastic containers. Keep product from freezing. The shelf life of the coating is one year.
View Product Data Sheet
View Safety Data Sheet


CorShield® Gold
Description: CorShield® Gold is a brilliant true gold colored waterbased coating. It has excellent salt spray and humidity resistance similar to VpCI®-386 Aluminum and is available in one package system. CorShield® Gold provides protection in harsh, outdoor, unsheltered applications. The complex mixture of nontoxic organic inhibitors and a platelet type gold pigment offers protection that can compete with zinc rich coatings. This special combination of additives, a platelet pigment, and a polymer barrier, significantly retards the reaction of metal ionization and repels water. It protects against corrosive electrolytes and aggressive environments, thus preventing corrosion.
Package:CorShield® Gold is available in 5 gallon (19 liter) pails and 55 gallon (208 liter) drums, and liquid totes.
View Product Data Sheet
View Safety Data Sheet


CorShield® VpCI® Transit Coating
Description: Water-reducible concentrate for transit protection of painted and unpainted surfaces.
Protection:Indoor or Outdoor Sheltered
Package:5 gal. (19 l), 55 gal. (208 l)
View Product Data Sheet
View Safety Data Sheet


CorShield™ VpCI-386 HP powered by Nano-VpCI
Description: VpCI-386 HP is the next genration of high performance water-based acrylic coatings that provide superior corrosion protection in harsh outdoor, unsheltered applications. The unique formulation contains a mixture of non-toxic organic inhibitors and pigments that offer extended coating protection which strongly competes with heavy metal zinc-rich primers and paints.
Package:VpCI-386 HP is available in 5 gallon (19 liter) pails, 55 gallon (208 liter) metal drums, liquid totes, and bulk. Keep product from freezing.
View Product Data Sheet
View Safety Data Sheet


EcoLine ® 3690 - Open Air Corrosion Inhibitor
Description: EcoLine® 3690 is a biodegradable, biobased, ready-to-use temporary coating designed for severe marine and high humidity conditions. When applied on the surface, this product leaves an oily film, which provides excellent outdoor protection on any metal surface. The film is self-healing and moisture-displacing, providing superior protection against aggressive environments.
Application: • Biodegradable • Biobased: made with sustainable resources • Non-hazardous, non-toxic • Excellent indoor and outdoor protection • Provides multi-metal corrosion protection • Excellent lubricity • Temperature stable up to 180°F (82°C) • Low freezing point 0°F (-18°C) • Can be applied to painted surfaces • Meets MIL-PRF-16173E (Grade 2)
View Product Data Sheet
View Safety Data Sheet


EcoLine® 3680
Description:
EcoLine 3680 is a temporary coating formulated with USDA (United States Department of Agriculture) certified biobased, renewable and biodegradable raw materials; which allows use for corrosion protection of equipment where incidental contact with food is possible. EcoLine 3680 leaves a tenacious, dry-to-touch protective coating, wax-like film that can be removed with alkaline cleaners such as Cortec® VpCI-414.

View Product Data Sheet
View Safety Data Sheet


EcoPrimer™
Description:
EcoPrimer™ is a core shell acrylic modified alkyd emulsion with bio-based primer. EcoPrimer™ provides good adhesion, salt spray resistance, and extremely low VOC. EcoPrimer™ has a fast drying time (20-30 minutes dry to touch). Its water-based formulation makes it easier to comply with environmental regulations governing solvents and VOC limits. Clean up is easy by using soap and water.

Features:
• 30% bio based
• Water-reducible
• VOC compliant
• Fast drying
• Excellent adhesion
• Extremely low VOC

Application:
EcoPrimer may be applied by spray or brush. A film thickness of 1.5-4.0 dry mils (37.5-100 microns) is recommended. The coating dries to touch in 20-30 minutes; however it takes approximately one week before the coating is fully cured. Topcoats can be applied between 30 minutes and 8 hours after the primer is applied, depending upon the type of top coat and the drying conditions.

Metals Protected:
• Carbon steel
• Stainless steel
• Galvanized steel**
• Aluminum**

** A wash primer such as VpCI®-373 green applied at 0.5-1.0 mils (12.5-25 microns) is recommended before applying the EcoPrimer to these substrates.
Package:
EcoPrimer is available in 5 gallon pails (19 liters), 55 gallon (208 liter) drums, or 275 gallon (1040 liter) totes.

Do not allow product to freeze.
View Product Data Sheet
View Safety Data Sheet


EcoShield® 386 Water Based Coating
Description: Ecoshield® 386 Water Based Coating Powered by Nano VpCI™ is the first water based coating that can provide 1000 hours of salt spray performance at 1 mil (25 microns) DFT.

The unique acrylic based formula uses a complex mixture of nano sized non-toxic organic inhibitors which provide protection which is superior to traditional corrosion inhibiting coatings.

Package:Ecoshield® 386 is available in 5 gallon (19 liter) pails, 55 gallon (208 liter) metal drums, liquid totes, and bulk.
View Product Data Sheet
View Safety Data Sheet


EcoShield® Barrier Coating for Paper and Corrugated
Description: EcoShield Barrier Coating is a water borne barrier coating that is recyclable and 100% repulpable, effectively eliminating the need to use traditional wax and polyethylene papers. In addition, the coating can be utilized on kraft and recycled paper to seal the surface from contaminants that could cause corrosion. The combination of a contaminant sealant and a repulpable coating for kraft paper makes EcoShield Barrier Coating a pioneer in the packaging industry. This material can also be used as a coating on liners for corrugated boxes providing a waterproof moisture barrier. EcoShield Barrier Coating also gives excellent oil and grease resistance.
Package:EcoShield Barrier Coating is available in 5 gallon (19 liter) plastic pails, 55 gallon (208 liter) metal drums, liquid totes, and bulk.
View Product Data Sheet
View Safety Data Sheet


EcoSonic® ESD Paper powered by Nano-VpCI®
Description: Cortec® EcoSonic® ESD Paper combines corrosion inhibiting and static-dissipative properties to provide a complete packaging paper for your valuable items. This product eliminates static electricity buildup through the use of an environmentally friendly coating made from soybean oil that is coated onto the surface of the paper. EcoSonic® ESD Paper performs better on the static half life test (a test with an environment consisting of little or no humidity) than papers with conventional anti-stat coatings consisting of Alkyl Ammonium Chlorides, typical ethoxylated amines, typical imidazolines, phosphated esters, and nonionic based antistat coatings.
Package:Custom sizes and constructions available upon request.
View Product Data Sheet
View Safety Data Sheet


VpCI®-2026 Top Coat
Description:
VpCI-2026 Top Coat is a 100% solids, 2-component, novolac epoxy coating designed for environments that require a high degree of chemical or temperature resistance. VpCI-2026 Top Coat is available in clear, and can be colored with any of the VpCI-2026 HPCS colorants.
Application:
The recommended application of this product involves pouring it in a narrow line directly onto the surface and then spreading it with a squeege. Spread the coating in a continuous manner from one side of the area being coated to the other. Immediately follow with a 3/8” (0.95cm) nap shed resistance roller. The VpCI- 2026 must be rolled as evenly as possible. To do this, roll forward in a straight line and then roll the same column backwards. Overlap the next column to be rolled by 1/2” (1.27cm) with the previously rolled column. Avoid excess agitation of the liquids with the roller. This will lessen chances of bubbling of the final film. The individual(s) applying the VpCI-2026 Top Coat should be wearing “spiked sandals”.
View Product Data Sheet
View Safety Data Sheet


VpCI®-280
Description: VpCI®-280 is a fast drying, versatile, industrial finishing enamel for manufacturers of metal products. This enamel offers a quick dry time, high gloss, and good color and gloss retention. It is ideal for industrial OEM users, including agricultural and construction equipment. Regulatory benefits include very low levels of VOC and Hazardous Air Pollutant Solvents.
View Product Data Sheet
View Safety Data Sheet


VpCI®-368
Description: VpCI®-368 is a time-proven coating that provides excellent protection to metal substrates exposed to harsh outdoor conditions.
Application: • Pipe coating • Parts storage • Underbody coating • Wire rope • Steel plate • Machined parts
Package:5 gallon (19 liter) steel pails, 55 gallon (208 liter) metal drums, totes, bulk and 11 oz. (312 g) aerosol cans.
View Product Data Sheet
View Safety Data Sheet


VpCI®-369
Description: VpCI®-369 is our best inhibitor for use as an oil additive and/or temporary coating. The protective film is self-healing and moisture-displacing, providing superior protection against aggressive environments. VpCI®-369 is also excellent when used as an oil additive for mothballing, shipping, or storage of parts and equipment. In small percentages, VpCI®-369 has a minimal effect on viscosities.
Application: • Wire rope • Electrical connections/wiring • Sheltered coating • Gear protectant/lubricant • Long-term (5+ years) equipment lay-up • Stamping oil additive • Drawing oil additive • Cylinders • Working/moving parts
Package:5 gallon (19 liter) plastic pails, 55 gallon (208 liter) metal drums and 11 oz. (312 g) aerosol cans.
View Product Data Sheet
View Safety Data Sheet
View SGS Report/RoHS Compliance Documents


VpCI®-371
Description: VpCI-371 is a high temperature aluminum solventborne silicone coating that provides excellent corrosion resistance on metal substrates. VpCI-371 will dry tack free at room temperaturein about 20 minutes to 5B hardness. After the coating has been heated it will have a 9H hardness.
Application: • Automotive industry • Power generation • Aviation • Off shore drilling, etc
Package:5 gallon (19 liters) pails and 55 gallon (208 liters) drums
View Product Data Sheet
View Safety Data Sheet


VpCI®-372
Description: VpCI®-372 is a modified water-base acrylic, corrosion inhibiting strippable coating. It provides protection in two ways: atmospheric corrosion and as a physical barrier to protect against nicks, abrasion, scratches, etc. VpCI®-372 is used as a dry film, temporary coating for parts and equipment. The coating is stripped or peeled away prior to equipment use, and will not leave a residue.
Package:5 gallon (19 liters) pails, 55 gallon (208 liters) drums, liquid totes and bulk.
View Product Data Sheet
View Safety Data Sheet


VpCI®-373
Description: VpCI®-373 is a water-based wash primer. VpCI®-373 is used for bonding other primers and coatings such as VpCI®-386 to a variety of metal substrates.
Package:5 gallon (19 liters) pails, 55 gallon (208 liters) drums, liquid totes and bulk.
View Product Data Sheet
View Safety Data Sheet


VpCI®-375
Description: VpCI®-375 is a unique, water-based acrylic one coat system (primer & topcoat) that successfully provides protection in harsh, outdoor, unsheltered applications. The complex mixture of non-toxic, organic inhibitors offers protection that can compete with most paints and zinc-rich primers.
• Fast-drying, non-flammable • UV resistant when dried • Optimal outdoor performance • Can be used as one coat system (primer & topcoat) • Provides multimetal protection
Application: VpCI®-375 when applied in 4 mil DFT can be used as a topcoat & primer. VpCI®-375 can also be used as a topcoat with Cortec® VpCI®-374 primer. When solvent-based topcoats are applied over VpCI®-375, compatibility must be checked.
Package:5 gallon (19 liter) pails, 55 gallon (208 liter) drums, liquid totes and bulk.

Contact regulatory@cortecvci.com for specific color SDS

View Product Data Sheet
View Safety Data Sheet


VpCI®-380 Railcar Coating
Description:
VpCI-380 Railcar Coating is a unique, direct to metal (DTM), fluoropolymer modified water-based acrylic. Designed specifically for the railcar industry, the coating also demonstrates excellent adhesion to a wide variety of substrates including ferrous and non-ferrous metals and certain engineered plastics. The complex mixture of nontoxic, organic inhibitors offer protection that can compete with most primer / topcoat systems.

VpCI-380 provides a fast-drying thixotropic coating that exhibits alkyd-like gloss, flow, and leveling properties with good resistance to sag. The hardness and moisture resistance properties make it an excellent choice for air-dry / force-dry industrial finishes. It gives optimal outdoor performance without cracking or chipping upon prolonged exposure to sunlight.
Application:
When VpCI-380 is applied in 3-5 mil DFT, it can be used as a topcoat and primer. VpCI-380 can also be used as a topcoat with Cortec’s VpCI-395 primer.

Note: Make sure dew point is more than 5°F (2°C) less than air temperature for application.

Power agitate to a uniform consistency using a “squirrel cage” type mixer, hand-held drill mixer, or other equivalent method.

VpCI-380 can be applied by spray , flow coat, brush, or dip.
Package:
VpCI-380 is available in 5 gallon (19 liter) pails, 55 gallon (208 liter) metal drums, liquid totes, and bulk. Keep product from freezing. Product shelf life is 1 year.
View Product Data Sheet
View Safety Data Sheet


VpCI®-381
Description:
VpCI-381 is a waterborne urethane-acrylic hybrid dispersion. It is a one component topcoat designed to be used over various primers, such as VpCI-374, 375, 395 & 396. VpCI-381 can be prepared in almost any color desired, including clear. The major advantage of this top coat is that offers excellent adhesion to moisture cured primers and other primers even after it has fully cured. VpCI-381 has excellent wetting, high gloss, and excellent exterior durability when used over a primer.

View Product Data Sheet
View Safety Data Sheet


VpCI®-382
Description:
View Product Data Sheet
View Safety Data Sheet


VpCI®-383
Description: An ideal coating for dip applications. For OEM specs. Clear or colors. Semi-gloss appearance. Can be applied at low thickness.
Package:5 gallons (19 liters) pails, 55 gallons (208 liters) drums, liquid totes and bulk.
View Product Data Sheet
View Safety Data Sheet


VpCI®-384
Description: VpCITM -384 is a two-part white urethane top coat designed to be used over a moisture cure urethane primer, such as VpCI-396. VpCI-384 can be prepared in almost any color desired. The major advantage this top coat offers is excellent adhesion to a moisture cure urethane even after it is fully cured. In addition, VpCI-384 has a high gloss, excellent hardness, extremely good flexibility, excellent solvent resistance, and does not contain aromatic solvents.
Application: FEATURES • Excellent adhesion to moisture cure urethanes even when fully cured • High gloss • Excellent flexibility
METALS PROTECTED • Steel • Aluminum • Cast iron • Galvanized steel
TYPICAL APPLICATIONS • Bridges • OEM • Structural steel • Tanks
View Product Data Sheet
View Safety Data Sheet


VpCI®-384 Aluminum
Description: VpCI-384 RAL 9006 is a two-part aluminum urethane top coat designed to be used over a moisture cure urethane primer, such as VpCI-396. VpCI-384 RAL 9006 Aluminum can be prepared in almost any color desired. The major advantage this top coat offers is excellent adhesion to a moisture cure urethane even after it is fully cured. In addition, VpCI-384 RAL 9006 Aluminum has a high gloss, excellent hardness, extremely good flexibility, excellent solvent resistance, and does not contain aromatic solvents.
Application: FEATURES • Excellent adhesion to moisture cure urethanes even when fully cured • High gloss • Excellent flexibility • Excellent solvent resistance • Very hard coating

METALS PROTECTED • Steel • Aluminum • Cast iron • Galvanized steel
TYPICAL APPLICATIONS • Bridges • OEM • Structural steel • Tanks
View Product Data Sheet
View Safety Data Sheet


VpCI®-386
Description: VpCI®-386 is a unique, water-based acrylic primer/ topcoat that successfully provides protection in harsh, outdoor, unsheltered applications. The complex mixture of non-toxic, organic inhibitors offers protection that can compete with most paints and zincrich primers.
Application: VpCI™-386 can be used as a topcoat/primer. When solvent-based topcoats are applied over VpCI™-386, compatibility must be checked. VpCI™-386 can also be used as a topcoat with Cortec® VpCI™-374 as a primer.
Package:5 gallons (19 liters) pails, 55 gallons (208 liters) drums, liquid totes and bulk.

Contact regulatory@cortecvci.com for specific color SDS

View Product Data Sheet
View Safety Data Sheet


VpCI®-386 Aluminum
Description: VpCI®-386 Aluminum is a unique, water-based primer/topcoat that successfully provides protection in harsh, outdoor, unsheltered applications. The complex mixture of non-toxic, organic inhibitors and an aluminum pigment offers protection that can compete with most paints and zinc-rich primers. VpCI®-386 Aluminum is superior to many coatings with only inorganic pigments because the resistance has been improved by using a highly corrosion resistant aluminum platelet type pigment with organic corrosion inhibitors. The special combination of additives provides a composite polymer barrier that significantly retards the reaction of metal ionization and repels water. A protective film is adsorbed onto metal surfaces. It protects against corrosive electrolytes and aggressive environments, thus preventing corrosion.
Application: VpCITM-386 Aluminum can be used as a topcoat/primer. When solvent-based topcoats are applied over VpCITM- 386 Aluminum, compatibility must be checked. VpCITM- 386 Aluminum can also be used as a topcoat with Cortec® VpCITM-374 or VpCITM-395 as a primer.
Package:5 gallons (19 liters) pails, 55 gallons (208 liters) drums, liquid totes and bulk.
View Product Data Sheet
View Safety Data Sheet


VpCI®-386 HT Black
Description: VpCI-386 HT Black is a unique, high heat resistant water-based acrylic silicone primer/topcoat. The complex mixture of non-toxic, organic inhibitors, and silicone compounds offers excellent outdoor weathering and thermal heat protection.
Application: VpCI-386 HT Black can be used as a topcoat/primer. When solvent-based topcoats are applied over VpCI-386 HT Black, compatibility must be checked. VpCI-386 HT Black can also be used as a topcoat with Cortec® VpCI- 374 or VpCI-395 as a primer.
Package:VpCI-386 HT Black is available in 5 gallon (19 liter), 55 gallon (208 liter), liquid totes, and bulk. Keep product from freezing. Avoid temperatures higher than 75°F (24°C) while in storage.
View Product Data Sheet
View Safety Data Sheet


VpCI®-386-386 Winterized
Description: VpCI-386 is a unique water-based acrylic primer/topcoat that successfully provides protection in harsh, outdoor, unsheltered applications. The complex mixture of non- toxic organic inhibitors offers protection that can compete with most paints and zinc-rich primers.
Package:VpCI-386 is available in 5 gallon (19 liter) pails, 55 gal-lon (208 liter) metal drums, liquid totes, and bulk. VpCI-386 Winterized is available in clear only. Do not store product in freezing temperatures.
View Product Data Sheet
View Safety Data Sheet


VpCI®-387
Description: A high-build, self-priming coating (higher than VpCI®-386) for outdoor protection.
Package:5 gallons (19 liters) pails, 55 gallons (208 liters) drums, liquid totes and bulk.
View Product Data Sheet
View Safety Data Sheet


VpCI®-388
Description: A removable tack free, firm coating. Matte finish. Dilutable. Ideal for dip or spray. Long-term indoor storage, short- to medium-term outdoor storage (sheltered).
Package:5 gallons (19 liters) pails, 55 gallons (208 liters) drums, liquid totes and bulk.
View Product Data Sheet
View Safety Data Sheet
View SGS Report/RoHS Compliance Documents


VpCI®-389
Description: Our most protective water-based temporary coating. Excellent salt resistance, dilutable. Forms a lightly tacky film, dries clear, removable. Medium to long-term outdoor storage.
Package:5 gallons (19 liters) pails, and 55 gallon (208 liters) drums, liquid totes and bulk.
View Product Data Sheet
View Safety Data Sheet


VpCI®-390
Description: VpCI®-390 is a waterborne non-tacky temporary coating with excellent humidity resistance, very good salt spray resistance and excellent QUV resistance.
Package:VpCI®-390 is available in 5 gallon (19 liter) pails, 55 gallon (208 liter) drums, liquid totes and bulk.
View Product Data Sheet
View Safety Data Sheet


VpCI®-391 Non-tacky temporary Coating
Description: VpCI®-391 is a water-born, temporary coating that is intended for medium to long-term indoor and outdoor protection.
Package:VpCI®-391 is available in 5 gallon (19 liter) pails, 55 gallon (208 liter) drums, liquid totes and bulk. Keep product from freezing.
View Product Data Sheet
View Safety Data Sheet


VpCI®-392
Description: VpCI-392 is a self-crosslinking, anionic NMP free and APEO free dispersion of a modified aliphatic urethane in water. VpCI-392 is designed for industrial coatings applications requiring good gloss, clarity, chemical resistance, and adhesion to a variety of substrates and primers.

Primarily designed as a top coat over recommended primers; VpCI-375, VpCI-395, and VpCI-396, this coating also exhibits excellent adhesion (DTM) over difficult substrates such as; aluminum, brass, and copper.

VpCI-392 has excellent wetting properties, high gloss and can be prepared in most colors. Recommended uses for VpCI-392 include metal, (DTM), top coat on primed substrates, concrete, and wood.
Application: VpCI-392 may be applied by spray or brush. A film thickness of 1-2 dry mils (25-50 microns) is recommended. The coating dries to touch in 30-40 minutes; however it takes approximately one week before the coating achieves 100% of its physical properties.
Protection:Carbon steel
Stainless steel
Galvanized
Aluminum
Brass
Copper
Concrete
Wood
Package:VpCI-392 is available in 5 gallon (19 liter) metal pails. One gallon pails available upon request.

Important: A partially used container must be purged with nitrogen to prevent a reaction in the can if it is not used within one day!
View Product Data Sheet
View Safety Data Sheet


VpCI®-395 Epoxy Primer
Description: Long-term waterborne epoxy primer for steel and aluminum.
Package:Parts A & B available in 5 gallon kits (4 gallons & 1 gallon)
View Product Data Sheet
View Safety Data Sheet


VpCI®-396
Description:
VpCI-396 is a high solids aromatic moisture cure urethane. VpCI-396 is a direct to metal primer for multimetal protection. VpCI-396 should be top coated with an aliphatic urethane top coat for best results. In addition to the outstanding barrier protection, VpCI-396 also contains Vapor phase Corrosion Inhibitors for additional protection. VpCI-396 is suitable for immersed structures when applied over VpCI® CorrVerter® for marginally prepared surfaces; such as ballast tanks, storage tanks, or holding tanks containing hydrocarbons to high salinity solutions.

VpCI-396 forms a very hard, but flexible coating that cures in the presence of moisture in the air. For best results the curing conditions required are a relative humidity between 20% and 80% with temperatures above 32?F (0?C) and below 120?F (50?C).
Application:
  • Bridges
  • OEM
  • Structural steel
  • Storage tanks
  • Ballast tanks or ships
Package:1 gallon (3.8 liters), 5 gallons (19 liters) plastic pails.
View Product Data Sheet
View Safety Data Sheet


VpCI®-398 Vehicle Undercoat
Description: VpCI-398 is a coating that provides excellent protection to metal substrates exposed to harsh outdoor conditions. VpCI-398 is a soft, tack free, pliable, self-healing, durable undercoat suitable for trucks, automobiles, etc. Protects against abrasion, salt, and other corrosive elements.
Application: VpCI-398 may be applied by brush, spray, or dip. A film thickness of at least 4-5 dry mils (100-125 microns) is recommended for uncovered outdoor storage.
Package:VpCI-398 is available in 5 gallon (19 liter) steel pails and 55 gallon (208 liter) metal drums.
View Product Data Sheet
View Safety Data Sheet


VpCI®-812 Wax/Paste
Description: VpCI®-812 Wax/Paste is a long-lasting, high-shine wax and rust blocker containing high performance vapor corrosion inhibitors (VCI). VpCI®-812 Wax/Paste stops corrosion, ultraviolet (UV) rays and fiberglass oxidation that silently attacks the finish of vehicles beneath the shine.
Application: Apply VCI-812 Wax/Paste to painted metal surfaces. After the paste dries, buff it off with clean cloth.
Package:5 gallon (19 liter) pails, 55 gallon (208 liter) drums, liquid totes and bulk.
View Product Data Sheet
View Safety Data Sheet


VpCI®-819
Description: VpCI®-819 Wax/Rinse shines, seals and protects metal surfaces using vapor corrosion inhibitors. VpCI®-819 is formulated for application in high or low pressure sealer arches in automatic car washes and is safe for all paint finishes. VpCI®-819 penetrates into finishes, sealing paint and metal surfaces from the damaging effects of corrosion.
Application: VCI-819 Wax/Rinse should be applied to painted finishes with high, medium or low pressure spray. No other finishing treatment is necessary before air drying surfaces.
Package:5 gallon (19 liter) pails, 55 gallon (208 liter) drums, liquid totes and bulk.
View Product Data Sheet
View Safety Data Sheet