CortecLogo3dlt.gif iso.gif
VpCI® METALWORKING PRODUCTS
  
VpCI® Metalworking Brochure
EcoAir Brochure
EcoAir® Compressed air propelled non-flammable sprays
  
High Performance Lubricants - Brochure
  
VpCI®Technology for Automotive Industry

Click on the links below to access product descriptions and other information regarding various VpCI® (Vapor Phase Corrosion Inhibitor)/MCI® (Migrating Corrosion Inhibitor) product lines.





BioCorr® ATF Rust Preventative
Description: BioCorr ATF Rust Preventative is an oil-in-water emmulsion rust preventative that is intended for preservation of transmissions in storage and during transportation. BioCorr ATF Rust Preventative provides multi-metal protection and is an excellent environmentally sound alternative to petroleum derived products. This ready-to-use formulation can provide protection for up to two years of indoor storage; or during shipments when combined with VpCI® packaging materials.
Package:BioCorr ATF Rust Preventative is packaged in 5 gallon (19 liter) pails, 55 gallon (208 liter) drums, liquid totes, and bulk.
View Product Data Sheet
View Safety Data Sheet


BioCorr® Rust Preventative
Description:
BioCorr Rust Preventative is a waterbased, biobased, and biodegradable rust preventative that is intended for preservation of metals in storage and during transportation. BioCorr Rust Preventative provides multi-metal protection and is an excellent environmentally sound alternative to petroleum derived products. This ready-to-use formulation can provide protection for up to two years of indoor storage; or during shipments when combined with VpCI® packaging materials. Unlike rust preventative oils this product leaves a dry film on the surface of the metal that is virtually undetectable. This feature helps to create a clean workplace and prevents material waste. BioCorr Rust Preventative is VOC free and the formulation is biodegradable; eliminating expensive disposal costs associated with oils.

Application:
BioCorr is a ready-to-use product and can be applied by dipping or spraying. BioCorr SC is supplied as a viscous concentrate and must be diluted and thoroughly mixed prior to use.
Package:BioCorr Rust Preventative is packaged in 5 gallon (19 liter) pails, 55 gallon (208 liter) drums, liquid totes, and bulk.
View Product Data Sheet
View Safety Data Sheet
View SGS Report/RoHS Compliance Documents


CorrLube VpCI® Lithium EP Grease
Description: CorrLube™ VpCI® Lithium EP Grease is lithium complex grease formulated with a premium quality, severely hydrotreated base stock. It provides excellent resistance to oxidation and has good high temperature stability. CorrLube™ VpCI® Lithium EP Grease is suitable for both operating and lay-up conditions. CorrLube™ VpCI® Lithium EP Grease is specifically formulated with superior corrosion inhibiting properties against salt water, brine, H2 S, HCl and other corrosive agents. In addition, CorrLube™ VpCI® Lithium EP Grease incorporates vapor phase corrosion inhibitors for areas not in direct contact with the grease.
Application: Lubricating sleeves, Ball and roller bearings,Vehicle / equipment chassis,Fans,Areas greases are applied,Bushings,Pulley bearings, Sliding high-friction areas, Generator end bearings
Package:This product is available in 14.5 ounce cartriges (10 per case). It also available in 5 gallon (19 liters) pails and 55 gallons (208 liters) drums.
View Product Data Sheet
View Safety Data Sheet


CorrLube® Hydraulic Fluid
Description: CorrLube® Hydraulic Fluid is a fully formulated anti-wear, environmentally friendly, ecologically responsive, non-toxic fluid.
Package:5 gallon (19 liter) pails, 55 gallon (28 liter) drums, liquid totes and bulk.
View Product Data Sheet
View Safety Data Sheet


EcoAir® BioCorr® Rust Preventative
Description:
BioCorr Rust Preventative is a waterbased, biobased, and biodegradable rust preventative that is intended for preservation of metals in storage and during transportation. BioCorr Rust Preventative provides multi-metal protection and is an excellent environmentally sound alternative to petroleum derived products. This ready-to-use formulation can provide protection for up to two years of indoor storage; or during shipments when combined with VpCI® packaging materials. Unlike rust preventative oils this product leaves a dry film on the surface of the metal that is virtually undetectable. This feature helps to create a clean workplace and prevents material waste. BioCorr Rust Preventative is VOC free and the formulation is biodegradable; eliminating expensive disposal costs associated with oils.

Application:
BioCorr is a ready-to-use product and can be applied by dipping or spraying. BioCorr SC is supplied as a viscous concentrate and must be diluted and thoroughly mixed prior to use.
Package:BioCorr Rust Preventative is packaged in 5 gallon (19 liter) pails, 55 gallon (208 liter) drums, liquid totes, and bulk.
View Product Data Sheet
View Safety Data Sheet


EcoAir® Mold Release powered by Nano VpCI®
Description: EcoAir® Mold Release is a dual function mold release providing lubrication and corrosion protection to injection molds and other metal surfaces. The spray product forms a clear thin non-staining silicone coating on the mold for easier release of rubber, plastic, or metal castings. The biobased corrosion inhibitor component forms a molecular passivating layer to guard the mold surface against aggressive species, protecting it from corrosion during operation and storage.
Application: Shake well before and during use. Hold the can in an upright position 6-8 inches from the work piece and spray a light, even coating on the mold or metal surface before use or storage. Reapply if coating becomes scratched. Do not apply to energized equipment. Insert plastic extension tube into spray head to achieve pinpoint spray accuracy and minimize mist formation.
Package:Packaged in 10-14 oz. net wt. (284-397 g) recyclable aluminum cans, 12 cans per carton.
View Product Data Sheet
View Safety Data Sheet


EcoClean Silver and Gold Cleaner
Description: EcoClean Silver and Gold Cleaner is specially engineered to safely and effectively remove oxides, grease, oils and other contamination from delicate metal contacts of silver or gold commonly incorporated in electrical and electronic equipment. (Testing and use shows superior prevention of oxides/tarnish). Biodegradable and formulated to be free of harsh abrasives and toxic chemicals, this product is worker and environmentally friendly. Additional uses include cleaning fine silver and gold jewelry, silver dining service pieces, and more. Users will find this product provides superior cleaning and protection action and ease of use over other products of its type.
Application: Apply sparingly to contacts or area using a foam or chamois swab dampened with compound. Use a gentle rubbing action to assist cleaning action. Remove excess product and gently polish contacts or area using a clean, dry foam or chamois swab. The parts may immediately be rinsed under warm, running water then buffed dry with a soft, dry, absorbent cloth. Heavy oxidation may require gentle rubbing of the compound before rinsing.
Package:EcoClean Silver and Gold Cleaner is available in 16 oz. (453 g) jars, 6 jars per carton.
View Product Data Sheet
View Safety Data Sheet


EcoClean® Biodegradable Scale and Rust Remover Powered by Nano-VpCI®
Description: EcoClean® Scale Remover is a heavy duty biodegradable scale and rust remover. It is one of the fastest acting products on the market for dissolving heavy scale, corrosion, and naturally occurring oxides off metals. It is effective and safe to use on iron, carbon steel, stainless steel, copper, aluminum, magnesium, and their alloys. Powerful corrosion inhibitors contained in the scale remover protect treated metals from flash rust. EcoClean® Scale Remover is simple to use and non-toxic, providing one safe remover for all your descaling and de-rusting needs.
Package:EcoClean® Scale Remover water soluble pouch is available in 2.2 lb bags, 4 bags per carton. EcoClean® Scale Remover powder is available in 5 lb (2.3 kg), 50 lb (22.7 kg), and 100 lb (45.4 kg) bags. EcoClean® Scale Remover liquid is available in 5 gallon (19 liter) pails, 55 gallon (208 liter) drums, liquid totes, and bulk.
View Product Data Sheet
View Safety Data Sheet


EcoCorr™ Water Based Rust Preventative Powered by Nano-VpCI®
Description: EcoCorr™ Water-Based Rust Preventative is a complete replacement for oil-based preventatives for indoor protection of equipment and components. EcoCorr™ Water-Based Rust Preventative is non-hazardous and ready-to-use. EcoCorr™ Water-Based Rust Preventative is applied to metal surfaces by dipping or spraying. It does not typically need to be removed, but if necessary, can be removed with conventional alkaline cleaners, such as Cortec's VpCI®-410 Series.
Application: Product Preparation: Apply via dip, brush, or spray with a variety of equipment (conventional, pump spray, etc.)
Package:EcoCorr Water-Based Rust Preventative is available in 5 gallon (19 liter) pails, 55 gallon (208 liter) drums, liquid totes, and bulk
View Product Data Sheet
View Safety Data Sheet


EcoFog® VpCI®-337 Biodegradable Fluid
Description: Ecofog VpCI-337 is a ready-to-use waterborne vapor corrosion inhibitor for temporary protection of equipment and plants. It is a complete replacement for nitrogen blanketing and dry air systems that are both expensive to install and maintain. Nitrogen blankets are also a health hazard to personnel entering the interiors. Vapor phase corrosion inhibitors in Ecofog VpCI-337 migrate and protect metal surfaces, resulting in time and cost savings. The Ecofog VpCI-337 is used to protect edges of coils and stacks or to fog void spaces, tanks, containers, packages, and enclosures. These labor-saving techniques use a minimum of product to protect large areas or volumes. Ecofog VpCI-337 is effective on ferrous and non-ferrous metals as well as aluminum, plated steels, and copper. Ecofog VpCI-337 is consistently successful in providing protection to the basic metals, metalworking, and packaging industries.
Application: Fog or mist without dilution into containers, boxes, crates, and shrouded packages at a rate of 1 oz./ft3 (1 L/m3 ) of enclosed space. Spray on cardboard, wood pallets, closed and open cell foams, and other packaging materials. Always spray Ecofog VpCI-337 uniformly within enclosure and allow direct access of vapors to metal surfaces to be protected.
Package:Ecofog VpCI-337 is packaged in 5 gallon (19 liter) plastic
View Product Data Sheet
View Safety Data Sheet


EcoLine ® 3220
Description: EcoLine® 3220 is an exciting addition to our biodegradable line of products made with renewable resources. EcoLine® 3220 is a 100% biobased ready-touse temporary coating. This canola oil-based product offers a tenacious film which clings to metal surfaces, providing excellent contact corrosion protection in storage and shipment. In addition EcoLine® 3220 provides long lasting vapor corrosion inhibition.

Made from renewable materials and containing canola oil as a carrier, this product is environmentally safe, has excellent thermostability and has no effect on rubber, plastics or paints.

In addition EcoLine® 3220 provides multimetal protection and lubricity in a variety of applications.
Application: • Complete multimetal protection • Environmentally friendly and biodegradable • Biobased • Safe for users • VOC-free • Provides universal corrosion protection • Combines film-forming additives with (VpCIs) • Provides excellent anti-corrosion protection in high humidity atmospheres and chloride-containing environments • Lubricates parts • Good replacement for mineral oil and flammable solvents • Low pour point (-18°C)
View Product Data Sheet
View Safety Data Sheet


EcoLine ® Bio-Based All Purpose Lubricant
Description: EcoLine® Bio-Based/Bio-Degradable All Purpose Lubricant is designed for industrial, shop and home use. It contains a friction modifier and extreme pressure additive. It is safe for use on all metals and most plastics. EcoLine® Bio-Based/Bio-Degradable All Purpose Lubricant is perfect for both indoor and outdoor applications.
Application: Provides greaseless lubricity and has been modified for use with extreme pressure loads. All purpose lubricant is also non-flammable.
Package:16 oz. (455 mL), 5 gallon (19 liter) pails, 55 gallon (208 liter) drums, liquid totes and bulk. The product should be remain sealed before storage. The shelf life of EcoLine™Bio-Based/Bio-Degradable All Purpose Lubricant is up to 24 months.
View Product Data Sheet
View Safety Data Sheet


EcoLine ® Bio-Based Bearing, Chain and Roller Lube
Description: EcoLine® Bio-Based/Bio-Degradable Bearing, Chain & Roller Lube is a ready to use high quality rust preventative lubricant, formulated with American grown natural seed oil that surpasses the lubricity of most conventional lubes. EcoLine® Bearing, Chain & Roller Lube contains Vapor phase Corrosion Inhibitors (VpCI®) for indoor and outdoor conditions. It stops corrosion in two ways. First, a tenacious film clings to the metal surface to displace moisture. Second, Vapor phase Corrosion Inhibitors provide the protected areas with healing properties even when the lube is temporarily removed.
Application: Replaces and mixes freely with conventioal petroleum based bar & chain oils. Resists sling off from high speed chains; prevents smoking when under load; reduces vibration and noise.
Package:1 gallon (3.7 liter) and 5 gallon (19 liter) plastic pails, 55 gallon (208 liter) metal drums, 16 oz (472 mL) EcoLine™ spray bottles, totes and bulk.
View Product Data Sheet
View Safety Data Sheet


EcoLine ® Bio-Based Cutting Fluid
Description: EcoLine® Bio-Based/Bio-Degradable Cutting Fluid is a multifunctional biodegradable concentrate for metal cutting operations.
Application: This liquid cools the work pieces and tools, prevents welding of metals during the metalworking process and provides excellent corrosion protection and lubrication during the cutting process. The shelf life of EcoLine™ Bio-Based/Bio-Degradable Cutting Fluid is up to 24 months. Agitate before each use.
Package:16 oz. (455 ml) squirt container, 5 gallon pail, 55 gallon drum
View Product Data Sheet
View Safety Data Sheet


EcoLine ® Bio-Based Heavy Duty Grease
Description: EcoLine® Bio-Based/Bio-Degradable Heavy Duty Grease is formulated with American-grown natural seed oil that surpasses the lubricity of most conventional petroleum based greases. Utilizing the latest biotechnology, EcoLine® Bio-Based/Bio-Degradable Heavy Duty Grease is an environmentally friendly replacement for harmful greases.
Application: Replaces traditional mineral oil based food grade greases. Multi-metal protection.
Package:14 oz. cartridge, 5 gallon pail, 55 gallon drum
View Product Data Sheet
View Safety Data Sheet


EcoLine ® Bio-Based Long Term Rust Preventative
Description: EcoLine® Bio-Based/Bio-Degradable Long Term Rust Preventative is a biodegradable temporary coating designed for use in severe marine and high humidity outdoor and indoor environments. It protects against all types of corrosion and oxidation, and works well on a variety of metals. Its excellent penetrating properties aid in loosening frozen or rusted parts.
Application: Multi-metal protection designed to protect against salt spray and high moisture conditions.
Package:EcoLine® Bio-Based/Bio-Degradable Rust Preventative is packaged in 16 oz. (470 mL), 5 gallon (19 liter pails), 55 gallon (208 liter) drums, liquid totes and bulk. The product should remain sealed before storage. The shelf life of Ecoline® Bio-Based/Bio-Degradable Rust Preventative is up to 24 months.
View Product Data Sheet
View Safety Data Sheet


EcoLine® CLP
Description:
EcoLine CLP is a “green” version of a multifunctional penetrant/ lubricant, which provides the following properties:
• Lubrication
• Penetration
• Corrosion protection in humid and harsh environments
• Cleaning

This product is designed for industrial, shop and home use. EcoLine CLP is perfect for indoor and outdoor application and safe for use on all metals and most plastics.

This EcoLine product is based on a combination of canola oil and canola methyl ester as a carrier. Being 89-91% biobased, this product provides excellent lubricity and biodegradability. EcoLine CLP is environmentally friendly and leaves behind a very persistant layer that protects against corrosion.
Application:
• In-plant machining
• Bar and chain oil
• Flange lubricant
• Biodegradable and preservative oil for machinery
• Locks and hinges
• Nuts and bolts
• Office machinery
• Penetrating oil/lubricant
Package:
EcoLine CLP is packaged in 16 oz. (455 ml) spray bottles, 5 gallon (19 liter) pails, 55 gallon (208 liter) drums, liquid totes and bulk. The product should be sealed before storage. The shelf life of EcoLine CLP is up to 24 months.
View Product Data Sheet
View Safety Data Sheet


EcoLine® Metalworking Fluid
Description:
EcoLine Metalworking Fluid is formulated with biobased oil, additives, and emulsifiers and is an excellent replacement for chlorinated products. This product is designed to work in a variety of soft and hard water qualities and offers long-term protection for machine and components. Low maintenance and inherently stable, EcoLine Metalworking Fluid is designed for machine shops where long service life, excellent machining performance, health, and environmental concerns are important factors for increased productivity. This multifunctional biodegradable product is supplied in concentrated form and requires mixing with water before use.

Application:
Add EcoLine Metalworking Fluid to water using a high dispersion-mixing blade. Mix for 5-10 minutes. The emulsion should remain stable indefinitely. In case of separation, emulsion can be remixed.
View Product Data Sheet
View Safety Data Sheet


M-250 Additive to Soluble Oil
Description: M-250 is an anticorrosion additive to soluble oils, which is designed for use with a variety of naphtenic oil-based formulations. M-250 contains emulsifiers which allow this product to support stability of water emulsion (when added to the ready to use emulsion) or to add some emulsification properties to the soluble oil (concentrate).
When M-250 is blended with appropriate base oils and lubricants, the resulting soluble oil concentrate produces a stable oil in water emulsion, that is non-separating and non-foaming ready-to-use metalworking fluid.
M-250 is very compatible with many lubricants such as chlorinated paraffins, esters, and sulfurized fats. It is compatible with a range of biocides and defoamers which can be added to the soluble oil concentrate or working emulsion as needed.
Application: FEATURES • Long lasting protection • Does not contain any amines, nitrites, barium salts, chromates, or phosphate-based additives • High flash point • Compatible with most oil-based machining fluids • Provides additional emulsification properties

TYPICAL APPLICATION As an additive to soluble oils, M-250 can be added to the final oil in water emulsions in concentration 0.75% or to the oil concentrate 10-20% based on the dilution ratio with water.
View Product Data Sheet
View Safety Data Sheet


M-251 Additive to Synthetic Cutting Fluids
Description:
M-251 is an environmentally friendly , low foaming water soluble corrosion inhibiting additive for synthetic cutting fluids. It provides corrosion protection to carbon steel, copper, galvanized steel, and other ferrous and nonferrous metals and their alloys. M-251 provides both contact and vapor phases corrosion potection during and after operation.

M-251 is compatible with most water-based lubricants and with a range of biocides. It is compatible with sea water, which allows the use of this additive in off-shore conditions.
Application:
As an additive to synthetic cutting fluids M-251 should be added in the following concentrations:
Operation and short term (up to 30 days) protection after the operation - 0.75-1.0%
Operation and longer term (up to 90 days) protection after the operation - 1-5%
Operation with salt water - 2.5-5%
Operation with salt water and short term of protection after the operation - 5-10%

Other applications:
• Water-based lubricants
• Alkaline metal cleaners
• Water-based drilling muds
• Water-based hydraulic fluids
Package:
M-251 is available in 5 gallon (19 liter) plastic pails and 55 gallon (208 liter).

M-251 has to be stored sealed in a heated warehouse to avoid freezing. The shelf life is 24 months.
View Product Data Sheet
View Safety Data Sheet


M-531
Description:
M-531 is an oil-based package of corrosion inhibitors for petroleum and synthetic lubricants. M-531 provides outstanding non-staining properties with excellent demulsiblility and filterability. M-531 is very effective for napthenic, iso-paraffinic, PAO, etc. based lubricants.
Application:
M-531 can be used in a wide variety of industrial lubricant applications where excellent rust protection, filterability, and water resistance are required. In rust preventive applications it is particularly useful for coiled steel or stacked parts due to its outstanding non-staining properties.

M-531 is highly recommended for use in hydraulic fluids. M-531 is also ideally suited for formulating paper machine oils and circulating oils where good filterability, anticorrosion, thermal stability, and demulsification properties are required.
Protection:
• Carbon steel
• Copper
• Solder
• Stainless steel
• Cadmium
• Tin
• Galvanized steel
• Magnesium
• Lead
• Aluminum
• Silver
• Bronze
• Brass
• Zinc
Package:
M-531 is available in 5 gallon (19 liter) plastic pails and 55 gallon (208 liter) metal drums.
View Product Data Sheet
View Safety Data Sheet


M-532
Description: M-531/M-532 is an oil-based package of corrosion inhibitors for petroleum and synthetic lubricant.M-531 provides outstanding non-staining properties with excellent demulsibility and filterability.
Package:M-531/M-532 is available in 5 gallon (19 liter) plastic pails and 55 gallon (208 liter) metal drums.
View Product Data Sheet
View Safety Data Sheet


VpCI® Super Penetrant
Description: Cortec VpCI Super Penetrant offers a deep penetrating formulation that loosens frozen parts from locked in rust. Its deep penetrating capabilities allow the user to go through as much as 1/2 inch of rust in 30 minutes. VpCI Super Penetrant can be applied by a variety of convenient methods to meet any application needs including brush, hand pump spray, aerosol, and spray gun.
Application: • Maintenance • Lubrication • Temporary storage - spray a light coating on flat metal before or after metalworking • Small or complex metal parts - spray on or dip in • General surface treatment - spray, dip or brush surfaces to be protected for up to 24 months • Home repairs of squeaky items
Package:VpCI Super Penetrant is packaged in 5 gallon (19 liter) pails,55 gallon (208 liter) metal drums, liquid totes and bulk. It isalso available in aerosol form net weight 5.25oz (148.84g).
View Product Data Sheet
View Safety Data Sheet


VpCI®-277
Description: VpCI®-277 is a ready-to-use rust preventative designed for preservation of metals in storage and during transportation. VpCI®-277 contains a biobased corrosion inhibitor in a non-flammable, low VOC solvent carrier. Unlike traditional rust preventative oils, VpCI®-277 leaves a dry, virtually undetectable film on the metal surface. This feature helps to maintain a clean process.
Application: VpCI®-277 is a ready-to-use product and can be applied by dipping or spraying.
Package:VpCI®-277 is available in 5 gallon (19 liter) pails, 55 gallon (208 liter) drums, liquid totes, and bulk.
View Product Data Sheet
View Safety Data Sheet


VpCI®-280
Description: VpCI®-280 is a fast drying, versatile, industrial finishing enamel for manufacturers of metal products. This enamel offers a quick dry time, high gloss, and good color and gloss retention. It is ideal for industrial OEM users, including agricultural and construction equipment. Regulatory benefits include very low levels of VOC and Hazardous Air Pollutant Solvents.
View Product Data Sheet
View Safety Data Sheet


VpCI®-316 Liquid Concentrate Primarily for Copper and Brass
Description: Synthetic water-based inhibitor formulated primarily for copper and brass. Leaves transparent and lubricating film. Film is self-healing and scratch resistant.
Package:5 gallon (19 liter) pails, 55 gallon (208 liter) drums, liquid totes and bulk.
View Product Data Sheet
View Safety Data Sheet


VpCI®-322 Oil Concentrate
Description: Provides corrosion protection to lubricating or hydraulic oils in indoor or open air conditions. Forms a tenacious film that clings to metal surfaces, giving excellent contact corrosion protection. In addition to this film barrier, VpCI®-322 releases vapor phase corrosion inhibitors into the air above the oil, which attach to metal surfaces for additional corrosion protection. Conforms to MIL P-46002B, MIL I-85062, MIL C-16173D (Grade 3), and MIL I-85062.
Package:5 gallon (19 liter) pails, 55 gallon (208 liter) drums, liquid totes and bulk.
View Product Data Sheet
View Safety Data Sheet


VpCI®-323 Oil-Based Concentrate
Description: Vapor corrosion inhibiting oil-based concentrate for use with working engine systems. Provides excellent protection in indoor and outdoor atmosphere conditions. Oil-soluble corrosion inhibitors offer a tenacious film that clings to metal surfaces, giving excellent contact corrosion protection. In addition, Cortec VpCI®s release vapor phase corrosion inhibitors into the air above the oil. These VpCI®s attach electrochemically to the metal surface for additional corrosion protection.
Package:5 gallon (19 liter) pails, 55 gallon (208 liter) drums, liquid totes and bulk.
View Product Data Sheet
View Safety Data Sheet


VpCI®-325 Liquid for Indoor Protection
Description: Safe, convenient, ready-to-use vegetable oil/solvent-based liquid for general-purpose corrosion protection. Some applications include protection of sheet metals, wire, pipes, flanges and other fabricated and/or machined parts, guns and a host of other products. VpCI®-325 protects against corrosion and works as an excellent lubricant. VpCI®-325 performs effectively even under the adverse condition of 100% relative humidity and in the presence of such corrosive elements as chlorides, hydrogen sulfide and other sulfur compounds.
Package:5 gallons (19 liter) pails, 55 gallons (208 liter) drums, liquid totes and bulk.
View Product Data Sheet
View Safety Data Sheet
View SGS Report/RoHS Compliance Documents


VpCI®-326 Oil Additive
Description: Corrosion inhibitor oil additive for hydraulic oil and gearbox assemblies. VpCI®-326 performs effectively under the adverse conditions of 100% relative humidity, and in the presence of such corrosive species as chlorides, sulfur compounds or hydrogen sulfide. Contains no hazardous chromates, nitrites or phosphate inhibitors. VpCI®-326 possesses an exceedingly high flash point, enhancing in-plant safety when compared to common oil protectants. Conforms to MIL P-46002B, MIL I-85062, MIL C-16173D (Grade 3), and MIL I-85062.
Package:VpCI-326 is available in 32 oz. (0.92L) containers, 5 gallon (19 liter) pails, 55 gallon (208 liter) metal drums, liquid totes, and bulk.
View Product Data Sheet
View Safety Data Sheet


VpCI®-327 Solvent-Based Inhibitor
Description: Ready-to-use solvent-based corrosion inhibitor forms a tenacious film that clings to metal surfaces, providing excellent contact corrosion protection. In addition, VpCI®-327 releases vapor phase corrosion inhibitors, which condense and form a protective barrier over metal surfaces. The combined film and vapor phase action provides complete corrosion protection for internal metal parts. Conforms to MIL C-81309E (Grade 5) and MIL C-15075.
Package:5 gallon (19 liter) pails, 55 gallon (208 liter) drums, liquid totes and bulk
View Product Data Sheet
View Safety Data Sheet


VpCI®-329 Oil-Based Concentrates
Description: VpCI®-329 is a vapor corrosion inhibiting concentrate for use with lubricating, hydraulic and preservation oils. Provides excellent protection in sheltered outdoor/indoor conditions. VpCI®-329 protects in two unique ways by offering a tenacious film, which clings to metal surfaces, as well as vapor phase inhibitors into the air above the oil. The vapors condense and form a protective barrier on metal surfaces that are not in contact with the oil. This combination allows complete protection to internal system parts. Conforms to MIL-P-46002B, MIL-I-85062, MIL-C-16173D (Grade 3). VpCI®-329 F is FDA approved.
Package:5 gallon (19 liter) pails, 55 gallon (208 liter) drums, liquid totes and bulk
View Product Data Sheet USDA-FDA View Safety Data Sheet
View SGS Report/RoHS Compliance Documents


VpCI®-337 Waterborne Corrosion Inhibitor
Description:
VpCI-337 is a ready-to-use waterborne corrosion inhibitor for temporary protection. Vapor phase corrosion inhibitors in VpCI-337 migrate and protect metal surfaces, resulting in time and cost savings.VpCI-337 is used to protect the edges of coils and stacks or to fog void spaces, tanks, containers, packages, and enclosures. These laborsaving techniques use a minimum of product to protect large areas or volumes. VpCI-337 is effective on ferrous and non-ferrous metals as well as aluminum, plated steels, and copper. VpCI-337 is consistently successful in providing protection to the basic metals, metalworking, and packaging industries.

In most cases, products protected by VpCI-337 are ready-to-use. No degreasing or stripping is necessary by most end users. The metal will retain a clean, rust-free surface. In most cases, the thin protective film will not affect paintability, conductivity, appearance, or any other important property of metals or alloys.

VpCI-337 is also available in a cold weather version. VpCI-337 Winterized has a lower freezing point for the convenience of application and storage in cold temperatures.
Application:
• In-process protection
• Edge spray of coils and sheet stock
• Void spaces
• Double wall void spaces
• Fogging
Package:
VpCI-337 is packaged in 10-14 oz. net wt. (284-397g) recyclable aluminum cans (12/carton), 5 gallon (19 liter) plastic pails, 55 gallon (208 liter) metal drums, totes, and bulk.

VpCI-337 Winterized is packaged in 5 gallon (19 liter) plastic pails, 55 gallon (208 liter) metal drums, totes, and bulk.

Minimum storage temperature:
VpCI-337 12°F (-12°C)
VpCI-337 Winterized -26°F (-32°C)

Maximum storage temperature:
120°F (49°C)

Shelf life is 24 months.
View Product Data Sheet USDA-FDA View Safety Data Sheet
View SGS Report/RoHS Compliance Documents


VpCI®-338 Food Grade Corrosion Inhibitor
Description: Waterborne corrosion inhibitor concentrate for indoor use based on proven vapor phase technology. Excellence for edge treating of coils and stacks and of fogging packages and enclosures. Particularly effective on ferrous metals, aluminum and tinplated steels. Also works as a cleaner/degreaser on steel or tinplate. USDA approved.
Package:5 gallon (19 liter) pails, 55 gallon (208 liter) drums, liquid totes and bulk.
View Product Data Sheet USDA-FDA View Safety Data Sheet


VpCI®-340
Description: Cortec VpCI-340 CLP is a unique formulation performing a multiplicity of functions: cleaning, water displacement, freeing stuck mechanisms, superior lubrication and metal protection.
Cleaning: Cortec VpCI-340 CLP penetrates to undercut contaminants, rust, salt and moisture which are then easily brushed or wiped away. Lubrication: Cortec VpCI-340 CLP forms a thin longlasting lubrication film, which dramatically reduces friction and wear. Moving parts work smoother and will last longer.
Cortec VpCI-340 CLP can be used for indoor and outdoor applications. Its superior water displacing characteristics make it an ideal choice for applications of equipment and components that are exposed to outside weather. It conforms to MIL-L-63460 specification for “Lubricant, cleaner and preservative for weapons and weapons systems.”
Application: • Cleaning penetration • Maintenance • Lubrication • Water displacement • Temporary storage - spray a light coating on flat metal before or after metalworking • Small or complex metal parts - spray on or dip in • General surface treatment - spray, dip or brush surfaces to be protected for up to 24 months
Package:VpCI-340 CLP is packaged in 5 gallon (19 liter) pails, 55 gallon (208 liter) metal drums, liquid totes and bulk.
View Product Data Sheet
View Safety Data Sheet


VpCI®-344 Waterborne Lubricant
Description: Environmentally friendly concentrated corrosion preventive liquid/metalworking lubricant for wet tempering of galvanized and cold-rolled steel, difficult-to-produce metal stampings, wire rope, tubular products and machine parts. VpCI®-344 prevents corrosion indoors for up to two years. This product can be removed with conventional alkaline cleaners. Can also be used as a coolant. Apply by dipping.
Package:5 gallon (19 liter) pails, 55 gallon (208 liter) drums, liquid totes and bulk.
View Product Data Sheet
View Safety Data Sheet


VpCI®-345 Water-Based Lubricant
Description: VpCI®-345 is a semi-synthetic coolant/lubricant for light-duty cutting and grinding. For difficult-to-produce metal stampings, tubular products and machined parts. Superior to petroleum-based coolant rust preventives. VpCI®-345 prevents corrosion during in-plant processing, storage and export shipment up to 24 months. Ideally suited for light-duty machined and polished parts requiring long-term corrosion and surface protection. Ideally suited for light-duty cutting, milling, turning, drilling, boring, broaching, gear cutting and other machining operations.
Package:5 gallon (19 liter) pails, 55 gallon (208 liter) drums, liquid totes and bulk.
View Product Data Sheet
View Safety Data Sheet
View SGS Report/RoHS Compliance Documents


VpCI®-347 Corrosion Inhibitor/Heavy Duty Lubricant
Description: Liquid that provides corrosion protection for multimetals. Dilutable with water up to 1:40. Excellent lubricating and corrosion inhibiting properties. Replaces slushing oils on cold rolled and galvanized steel. For use as a metal-forming lubricant and synthetic machining coolant. VpCI®-347 is formulated for deep-draw applications.
Package:5 gallon (19 liter) pails, 55 gallon (208 liter) drums, liquid totes and bulk.
View Product Data Sheet
View Safety Data Sheet


VpCI®-377 Water-based Concentrate
Description: VpCI-377 is a water-based concentrate designed as a complete replacement for oil-based preventives for indoor protection of equipment and components. VpCI-377 is a corrosion preventive liquid that meets tough antipollution requirements. The wide dilution range with water (0.5-20%)* allows flexibility to customize the length of protection required and the applied cost per square foot (or m2).

VpCI-377 forms a solution in water and is applied to metal surfaces by spraying or dipping. VpCI-377 does not need to be removed, but if necessary, can be removed with conventional alkaline cleaners, such as Cortec’s VpCI-410 series.

VpCI-377 is also available in a cold weather version. VpCI-377 Winterized has a lower freeing point for the convenience of application ansd storage in cold temperataures.

*Contact Cortec Representative for dilution recomendations.
Application: Add VpCI-377 to water and mix thoroughly. Spray, dip, or use in parts washers and rinse tanks. Solution concentration can be monitored by a refractometer, pH and titration methods.

The pH of VpCI-377 needs to be above 8 in order to be effective.
Package:
VpCI-377 is available in 5 gallon (19 liter) pails, 55 gallon (208 liter) drums, liquid totes, and bulk. The product should be stored sealed in a heated warehouse to avoid freezing.

VpCI-77 Winterized is available in 5 gallon (19 liter) pails, 55 gallon (208 liter) drums, liquid totes, and bulk.

VpCI-377 is also available in EcoAir® compressed air cans (12 oz. / 340 g) bottles.

Shelf life is 24 months.
View Product Data Sheet
View Safety Data Sheet
View SGS Report/RoHS Compliance Documents


VpCI®-378
Description: VpCI®-378 is a water-based concentrate designed as a complete replacement for oil-based corrosion preventives.
Package:available in 5 gallon (19 liter) pails, 55 gallon (208 liter) drums, liquid totes and bulk. The product should be stored sealed in a heated warehouse to avoid freezing. VCI-378 has a shelf life of 24 months.
View Product Data Sheet
View Safety Data Sheet
View SGS Report/RoHS Compliance Documents


VpCI®-379
Description: VpCI®-379 is a water-based corrosion preventive liquid concentrate designed to meet tough anti-pollution requirements.
Package:available in 5 gallon (19 liter) pails, 55 gallon (208) liter drums, liquid totes and bulk. The product should be stored in a heated warehouse to avoid freezing. VpCI-379 has a shelf life of 12 months.
View Product Data Sheet
View Safety Data Sheet
View SGS Report/RoHS Compliance Documents


VpCI®-611 Water-Based Concentrate Inhibitor
Description:
Water-based rust preventive concentrate for water blasting or wet abrasive blasting. It leaves a very thin, transparent, tack free film on the metal surface. Weldable and paintable film is non-toxic, pro-environmental and contains no nitrite or phosphate inhibitors.
Package:5 gallons (19 liters), 55 gallon (208 liters), liquid totes and bulk.
View Product Data Sheet
View Safety Data Sheet