CortecLogo3dlt.gif iso.gif
CORTEC PRODUCT INFORMATION


S-11 Additive
Description: Additive for acid systems such as industrial cleaning solutions and hot pickling baths
Application:
S-11 prevents corrosion in mineral acids, such as nitric, hydrochloric, sulfuric and phosphoric.

S-11 Org is especially effective in organic acids such as acetic, citric, formic, tartaric, also in sulfamic, phosporic acids, and EDTA.

S-11/S-11 Org do not affect the pH level so it will not affect the technological processes. Usually, S-11/S- 11 Org are used at a concentration level of 0.1-1.0% by weight of total formula, and can be post-added if desired.

The concentration of inhibitor required depends on the concentration of the acid and operation conditions. In general, S-11/S-11 Org are effective at low concentrations, but at temperatures over 200O F (93O C), higher concentrations of S-11/S-11 Org corrosion inhibitors may be needed (0.50-1.0% for S-11 and 1- 4% for S-11 Org). However, the most effective concentrations are best determined by laboratory tests.
Package: 5 gallons (19 liters), 55 gallons (208 liters),
View Product Data Sheet

S-11.S-11_Org.pdf

View Editorials and Technical Articles

View Safety Data Sheet
 
 
 

 

   
 

Cortec®, MCI®, VpCI®-126 Blue®, EcoFilm®, EcoWorks®, Rawn® and Bull Frog® are registered trademarks of Cortec Corporation.

Last modified: June 07 2017 05:43:48.